Hello. :)
At the beginning I want to say that English isn’t my primary language and I apologize for mistakes. I hope this text will be understandable.
I have problem with my LG P710 [L7 II].
Few months ago I have tried to upgrade it using LG_KDZ_FW-Update.
I have started to look for the best software for me and after a long time I found software which include root and CWM Recovery… wow.
Instalation wasn’t completed successfuly. From this time I can run my device only in Emergency Mode. No matter if I connect it to the USB, battery charger or just press button to turn it on.
[IMG="1"]iv.pl/images/79221719060656785744.png[/IMG]
I don’t know I did something wrong, the instruction was bad or maybe soft was demaged.
I have another cell phone so it wasn’t urgent to repair it then, but now I think it’s time to do it!
I hope you can help me with that.
I’m trying to do it this way:
• Download and install drivers [LGMobileDriver_WHQL_Ver_4.0.3]
• Download and install update tool [LG_KDZ_FW-Update_OfflineFix]
• Download software [V20A_00.kdz]
(I’m working on Lenovo G510 with Windows 10 installed)
• Change hosts file [C:\Windows\system32\drivers\etc] by adding at the end:
127.0.0.1 csmg.lgmobile.com
• Install B2CApp [setup file is inside LG KDZ FW Uptede Toll folder]
• Then I’m opening Automatic Offline Procedure script.
• Few windows appears on my screen. At this time I have Windows Enabler On and Small Server is running.
[IMG="2"]iv.pl/images/69750897229764052507.png[/IMG]
[IMG="3"]iv.pl/images/79298129291490217420.png[/IMG]
[IMG="4"]iv.pl/images/23568906554210172044.png[/IMG]
[IMG="5"]iv.pl/images/57381954453509315860.png[/IMG]
• After that script starts R&D test toll, I set Phone Mode [Emergency], select my .kdz file and
press Normal Web upgrade test, then on next window Upgrade Start.
[IMG="6"]iv.pl/images/73812047863937669545.png[/IMG]
• Afterward I clear Software Update Registry, select my language and press on OK.
[IMG="7"]iv.pl/images/96476124535044588688.png[/IMG]
[IMG="8"]iv.pl/images/67303857364460179189.png[/IMG]
• Phone Update window appears. Analysis done, download as well, but update stops at 4%.
[IMG="9"]iv.pl/images/61919727362681058622.png[/IMG]
According to the instruction I disconnect mobile, remove battery and connect it again with pressing Vol- (In order to enter Emergency Mode I guess. I’m lucky guy, I haven’t to press anything, my phone always turn on into Emergency)
• No change after clicking restart. 4% is everything I can get.
[IMG="10"]iv.pl/images/29129926040891470533.png[/IMG]
ctrlv.it/id/2452/3915649230 - Logs
If you know what is wrong, you have any advice, please help. :)
At the beginning I want to say that English isn’t my primary language and I apologize for mistakes. I hope this text will be understandable.
I have problem with my LG P710 [L7 II].
Few months ago I have tried to upgrade it using LG_KDZ_FW-Update.
I have started to look for the best software for me and after a long time I found software which include root and CWM Recovery… wow.
Instalation wasn’t completed successfuly. From this time I can run my device only in Emergency Mode. No matter if I connect it to the USB, battery charger or just press button to turn it on.
[IMG="1"]iv.pl/images/79221719060656785744.png[/IMG]
I don’t know I did something wrong, the instruction was bad or maybe soft was demaged.
I have another cell phone so it wasn’t urgent to repair it then, but now I think it’s time to do it!
I hope you can help me with that.
I’m trying to do it this way:
• Download and install drivers [LGMobileDriver_WHQL_Ver_4.0.3]
• Download and install update tool [LG_KDZ_FW-Update_OfflineFix]
• Download software [V20A_00.kdz]
(I’m working on Lenovo G510 with Windows 10 installed)
• Change hosts file [C:\Windows\system32\drivers\etc] by adding at the end:
127.0.0.1 csmg.lgmobile.com
• Install B2CApp [setup file is inside LG KDZ FW Uptede Toll folder]
• Then I’m opening Automatic Offline Procedure script.
• Few windows appears on my screen. At this time I have Windows Enabler On and Small Server is running.
[IMG="2"]iv.pl/images/69750897229764052507.png[/IMG]
[IMG="3"]iv.pl/images/79298129291490217420.png[/IMG]
[IMG="4"]iv.pl/images/23568906554210172044.png[/IMG]
[IMG="5"]iv.pl/images/57381954453509315860.png[/IMG]
• After that script starts R&D test toll, I set Phone Mode [Emergency], select my .kdz file and
press Normal Web upgrade test, then on next window Upgrade Start.
[IMG="6"]iv.pl/images/73812047863937669545.png[/IMG]
• Afterward I clear Software Update Registry, select my language and press on OK.
[IMG="7"]iv.pl/images/96476124535044588688.png[/IMG]
[IMG="8"]iv.pl/images/67303857364460179189.png[/IMG]
• Phone Update window appears. Analysis done, download as well, but update stops at 4%.
[IMG="9"]iv.pl/images/61919727362681058622.png[/IMG]
According to the instruction I disconnect mobile, remove battery and connect it again with pressing Vol- (In order to enter Emergency Mode I guess. I’m lucky guy, I haven’t to press anything, my phone always turn on into Emergency)
• No change after clicking restart. 4% is everything I can get.
[IMG="10"]iv.pl/images/29129926040891470533.png[/IMG]
ctrlv.it/id/2452/3915649230 - Logs
If you know what is wrong, you have any advice, please help. :)
No comments:
Post a Comment