Bone stock M919 (as far as I know - got the phone used at NK2 IIRC), OTA updated to OH3. Was having some issues, decided to Odin (3.10.7) same firmware (M919UVUFOH3_M919TMBFOH3_M919UVUFOH3_HOME.tar.md5 from sammobile.com) over.
Odin log:
Device screen:
After rebooting, device goes into odin mode with "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
I tried both Kies v2 and v3 and neither is able to detect it in the emergency recovery mode
Also tried 3 different USB cables and all the ports on my laptop, with no results.
Odin log:
Quote:
<OSM> Enter CS for MD5.. <OSM> Binary Check MD5.. Do not unplug the cable.. <OSM> Please wait.. <OSM> Checking MD5 finished Sucessfully.. <OSM> Leave CS.. <ID:0/004> Added!! <ID:0/004> Odin engine v(ID:3.1100).. <ID:0/004> File analysis.. <ID:0/004> SetupConnection.. <ID:0/004> Initialzation.. <ID:0/004> Get PIT for mapping.. <ID:0/004> Firmware update start.. <ID:0/004> SingleDownload. <ID:0/004> aboot.mbn <ID:0/004> NAND Write Start!! <ID:0/004> sbl1.mbn <ID:0/004> sbl2.mbn <ID:0/004> sbl3.mbn <ID:0/004> rpm.mbn <ID:0/004> tz.mbn <ID:0/004> boot.img <ID:0/004> recovery.img <ID:0/004> system.img.ext4 <ID:0/004> Complete(Write) operation failed. <OSM> All threads completed. (succeed 0 / failed 1) |
Quote:
ODIN MODE PRODUCT NAME: SGH-M919 CURRENT BINARY: Samsung Official SYSTEM STATUS: Official KNOX KERNEL LOCK: 0x0 KNOX WARRANTY VOID: 0x0 CSB-CONFIG-LSB: 0x30 WRITE-PROTECTION: Enable eMMC BURST MODE enabled START [224, 1440] BAR [240, 1440] |
I tried both Kies v2 and v3 and neither is able to detect it in the emergency recovery mode
Also tried 3 different USB cables and all the ports on my laptop, with no results.
No comments:
Post a Comment