HELP I REALLY NEED YOU GUYS RIGHT NOW THIS IS FOR MY HTC ONE M9 error code 21

So long story short: i tried to flash the stock rom to my htc one m9 and then this error 21 appeared and i cant find anything on xda to solve it so please all you htc one software gurus out there help me on this one and i would be really greatfull here is my fill report from what i got from fastboot


C:\Android\com>htc_fastboot flash zip 0PJAIMG.zip
htc_fastboot v3.0.7 (2015-03-30)
target rom version: 2.10.401.1
found large-zip header, file count: 7
processing file 1/7...
sending 'zip' (126441 KB)...
OKAY [ 7.019s]
writing 'zip'...
(bootloader) HOSD CL#576582
(bootloader) GPT is up-to-dated. [17408]
(bootloader) start@23
(bootloader) aboot_signed.img@100%
(bootloader) rcdata.img@100%
(bootloader) splash1.nb0@100%
(bootloader) adsp.img@100%
(bootloader) modem_st1.img@100%
(bootloader) modem_st2.img@100%
(bootloader) pg2fs_ship_signkey.img@100%
(bootloader) sensor_hub.img@BYPASS
(bootloader) apppreload.img@22%
(bootloader) apppreload.img@45%
(bootloader) apppreload.img@68%
(bootloader) apppreload.img@90%
(bootloader) apppreload.img@100%
(bootloader) cota.img@100%
(bootloader) sdi.img@100%
(bootloader) sbl1-8994-1.img@100%
(bootloader) pmic-8994-1.img@100%
(bootloader) cpe.img@100%
(bootloader) rpm-8994-1.img@100%
(bootloader) tz-8994-1.img@100%
(bootloader) hyp-8994-1.img@100%
(bootloader) recovery_signed.img@100%
(bootloader) tp_MXM11876.img@BYPASS
(bootloader) tp_SYN3351.img@BYPASS
(bootloader) hosd_signed.img@100%
(bootloader) boot_signed.img@100%
(bootloader) radio.img@100%
(bootloader) Update zip file OK
(bootloader) end@Done
OKAY [ 13.058s]
finished. total time: 20.077s
processing file 2/7...
sending 'zip' (399971 KB)...
OKAY [ 24.006s]
writing 'zip'...
(bootloader) HOSD CL#576582
(bootloader) start@1
(bootloader) system.img_00@9%
(bootloader) ERR SPARSE data size=-1
(bootloader) system.img_00@FAIL
(bootloader) system.img_00@FAIL
(bootloader) system.img_00@FAIL
(bootloader) system.img_00@FAIL
(bootloader) system.img_00@FAIL
(bootloader) system.img_00@FAIL
(bootloader) ERR inflate fail: uncompressed size(753989696) is not equal
(bootloader) total out size(753989682)
(bootloader) ERR inflate fail, zerr=-3, total_out=753989682
(bootloader) ERR zerr=-3, Z_STREAM_END=1, total_out=753989682
(bootloader) ERR [SD_UPDATE_ERR] unzip_and_update_partition: failed to u
(bootloader) nzip image or update partition[system][err 21]
(bootloader) system.img_00@FAIL
(bootloader) ERR [SD_UPDATE_ERR] do_update_zip_buf: unzip_and_flash_imag
(bootloader) es fail, err 21
(bootloader) ERR [SD_UPDATE_ERR] sddownload failed: 21
(bootloader) ERR Update zip file failed.
(bootloader) system.img_00@FAIL
(bootloader) Update zip file OK
(bootloader) ERR ZIP ERROR CODE, 21
(bootloader) end@Done
FAILED (remote: 21: fail to flash via downloadzip)
finished. total time: 32.941s
htc_fastboot finished. total time: 55.635s

C:\Android\com>

Help finding right forum for Samsung Galaxy S4 Active Flashing/Unlocking

Good afternoon everybody Im looking for some help in how to unlock my At&t Samsung Galaxy S4 Active I537. I followed previous instructions and when I got to the Service Mode, entered "back"then Key input "Q"' Key input 0000 I selected as instructed ÚMTS'and then Debug Screen then phone control then Network Lock and when it gives me the next menu it only says ópt 1 and 2
1 Perso Sha256 Info and 2 RAT_FREE_SUPPORTING ON and thats it. I got stuck there. It says SERVICE LIMITED Any help PLEASE.

Right side of screen partly unresponsive to touch

After I replaced the the whole screen assembly, about 2 cm of the screens right side is almost unresponsive to touch.

It always works, if i touch a spot on the screen that works 100% and then immediately after that touch a spot on the rigtht side.
Sometimes it also register a touch if I try like 10 times.

Could this be software? The phone is not rooted og flashed. I have tried to restore to factory defaults. I'm thinking maybe I could get lucky with a different ROM/Kernel?

I'm also wondering if it is a loose connection to the digitizer? But the I think its wierd that it works when I first "Activate" the screen by touching it on another spot first.

I hope someone can come up with some ideas to try before I open it up again, as it is quite hard to get appart, and I'm worried to brake the new screen.

Regards
TJMacGyver