Pure Nexus 6.0 R1- Signal Works But No Data

I flashed the pure nexus ROM 6.0 release coming from benzorom some nightl y build not positive which. I flash the 6.0 bootloader and radio from recovery and then flashed the ROM and gapps. Can't get any data for some reason. Can someone help?

Reboot HTC One M8 no Signal

Hi all well this problem i been having for a while now and i cant find anything about it ,but every time i reboot/Or turn my phone on i get no signal for my operator until i turn airplane mode ON and OFF quickly then my signal come on is there a way to fix this problem :confused:

problem with note3 sm-n9005 signal

hello,
i have a very annoying problem
i just bought my note3 2 days ago and i found out that it has a very bad signal reception in my home although the signal has two and sometimes 3 bars in it!! but it says "emergency calls only"! :confused:
the thing that worries me is that, i had note1 and the signal reception was way better, i also tried many mobiles and they all good!!

so i wanted to knew if there is anything i can do to solve this problem?

i'm on lollipop 5.0
also from egypt.
many thanks in advance

Lost my imei on z2 & no signal

Hi every body... This my first participation here and i don't know if it is the right place to share my problem with..
But i hope you help me with it.. So here it is: my friend install a new rom for my sony z2 but i think he did it in a wrong way cause after that there was a message tell me the the software update had failed.. So i didn't know what should i do.. And i tried to fix theat issue using pc comopanion and it seems that fixed the problem until i login after it finished to find out that the phone lost its imei number and i can't enter to my mobile network at all .. ie no signal and mobile not recognize sim card... So how can i fix this damm problem.. ?? i still have imei number on word file if this can help..
And thanks any way

Chinese Version in UK - Any confirmed tweaks for signal strength?

Hi,

I currently use the latest OxygenOS and ak's 004 kernel. My sim card is EE which has the best range of channels. Although i've had my opt for over a month iv'e yet to switch from my old phone due to very poor reception - its half bars where my older phone has full bars, and no bars where my old phone has 2 bars.

Has anyone any confirmed tweaks or instructions to improve this that i can personally do?

I am guessing the best advice is to change ROM and kernel - Anyone in uk switched ROMS and found an improvement? However im a bit fed up wiping phone and reinstalling everything from backups (any ROM installations or updates cause many issues to me unless I flash full from scratch). I just follow and wait for a cm ROM (Developers doing a great job!). I believe exodus has nightlies which would make it easier to update but id read somewhere there was a virus in one of the builds and that theres some custom security regulated by the developer which is effectively classed as dangerous malware due to giving developer complete control, and prohibitive of being able to use certain software (apologies if its not exodus ROM).

I saw the issue exists in opo but you could use oppo 7 modem firmware to fix this. havent seen anything like this for op2. Im a regular visitor to the OPT forums, apologies if i have missed a thread or post if a solution is present.

Thanks

I9505 Signal problems

Hi
For a very long time I've been having signal problems, it just suddenly stops working and I have to reboot to get any signal back (airplane mode on and off doesnt work).

Its a GT-I9505
4.4.2
Goldeneye Rom

Greetings

XT1093 Won't Get Signal, Preferred Network Type Problems

Ok so this is a pain.

I did a full factory reset, then flashed this rom, thinking it should work perfectly, since 5.1 uses the same modem for all phones. My problem is, the "Preferred Network Type" in the *#*#4636#*#* menu on US Cellular (hence the XT1093) should be "LTE/GSM/CDMA auto (PRL)" but is instead set to "LTE/GSM auto (PRL)". Every time I try to change it, my phone gets a roaming symbol, with no bars, and an activation screen pops up for a fraction of a second, then goes back to the no signal symbol. When I go back to check the Preferred Network Type, it has changed back to "LTE/GSM auto (PRL)" again. I believe if this can be fixed, my phone will work.

I have seen threads that say to edit your build.prop file and add a line- like THIS, but it doesn't work.

I'm really in a bind. According to the mods at teamuscellular.com, I can't go back to stock because we don't have a stagefright patch build yet, and downgrading might brick my phone, and it feels like just some quirk I need to get fixed to have this software running. Thanks in advance!

Signal Problem

hey guys i have a N910c here with a strange problem when i insert a sim the phone detects it but i get no signal at all any possible way to fix this??

phone have no signal

i purchase my z1 yesterday and it works fine but it haves no signal after i buy sim its also dont have signal its unloced my provider is telenor (900mhz&1800) for 2g can enybody tell me why i dont have network

opo hard-bricked, recovered and now has problem getting cellular signal

Hi guys,

Tried to flash OxygenOS 1.03 through twrp 2.8.7 after getting some annoying problems with OPO on the latest CM11s.
Done many flashes before so didn't really expect much problems. Then OPO couldn't boot up at all with black screen. I followed the instruction here to unbricked with factory tool to clash an old edition of ColorOS and I thought that was the end of it. Flash OxygenOS again, bricked again. :eek:

Then I recovered and flashed COS 12.1. Didn't really want to make the jump but I had too. I immediately noticed I am unable to connect to 4G. Thinking that the OS 1.03 from OP didn't contain any modem update and thus the hard brick, I flashed 1.03 again and worked. Again no 4G or any cellular connection. I went out side and finally got a very weak 4G connection (I usually have full bar around my home). Really desperate, I flashed back to official CM12s, and flashed the correct radio for it. Same thing.

It has been a week now. I could get some connection if force it to 3G but still very spotty. It is hard to use. I tried different modems, even one from ColorOS because I am in China and I got the phone in US.

Any tips on solving this? :confused:

Sprint Signal issues?

Just wondering if could be faulty unit or Sprint signal problems but i've been getting dropping signals randomly inside of my house, and also friend telling me that they called me but i never them calls, if more ppl like me?

Sent from my XT1575 using Tapatalk

cm-12-20150214-UNOFFICIAL-endeavoru-big. No phone signal

Hi all

Am running cm-12-20150214-UNOFFICIAL-endeavoru-big on my HTC One X International Version. All went well for a week. Now the phone signal is really low. In fact mostly there is not signal at all.

Anyone have this experience? And a fix?

Thanks

Losing data and bad signal

Hey guys want to see if any of you guys had this issue with oneplus one.
I just bought a used 1 and every once in awhile i get no signal at all and lose data.after i toggle airplane mode i get signal back.i running cos 12 and oxygen modem.deleted all apns but kept 1 for my provider.do u think is a hardware issue.i attached pic

Sent from my A0001 using XDA Free mobile app

Attached Thumbnails

 

Signal Indicator Modification

I am looking for an app or mod that would allow you to change the range of dbm that the signal indicator responds to, i.e., rather than having a range of -130dbm(low) to -50dbm(high) to determine how many bars are shown, change the values to -120dbm to -80dbm.

Anyone come across something like that?

Thanks!

signal problem

Good afternoon, I'm new in this forum. I have a question I hope could help solve this problem. My smartphone is moto g 2015 (XT1541). I wonder if unlocking the bootloader and putting a Latin America firmware (XT1542) my phone would have 3G and 4G signal in Ecuador.
thanks for answer.

Weak LTE signal after JFLTE-GPE 5.1 update

Has anyone experience weaker LTE signal after updating from JFLTE-GPE 5.0 to JFLTE-GPE 5.1? I only been getting 3g signal for the most part. Is there a fix?

Help on the carrier signal

personal, I'm from Brazil, and I have a doubt .. my device is xt1563 duos chip 32gb, after flashing the rom my device is not showing the carrier signal, someone help me? the TWRP is updated, already tried all roms, and several gapps, thank you!

Cell call quality and Signal quality?

Has anyone heard anything about about this yet?

For me, this will be the deciding factor between this and the moto x. I have udp on verizon and tether all the time. I also use my phone for work, and need a good cell network radio and connection at all times.

Most people have said the moto gets good service, as they are known for good radios. Huwaiei? Never heard of them... So im skeptical.

Sent from my SCH-I545 using Tapatalk 2

Lg G4 F500L restore signal after flash 815 v10c

TESTED ONLY F500L WITH V10C SOFTWARE VERSION
Resolves BootLoop and Signal Problem.

HELPFULLY DOWNLOADS LINKS TO KDZ AND ROOT (Will not help with that)

KDZ
downloads.codefi.re/autoprime/LG/LG_G4/H815/H81510C/H815_EU_10C_00.kdz

PRE-ROOTED SYSTEM IMG
http://downloads.codefi.re/thecubed/...510c-eu.tar.gz

backupimg.zip (All partition images necessary)
drive.google.com/file/d/0ByvysDj-CgQWbDcwTlBzVld1d3M/view?usp=sharing


REQUIREMENTS
Flashed H81510C-EU KDZ with root access.
Install SSHDroid on PlayStore.

Procedures
Download and extract backupimg.zip. Send folder "backupimg" to G4 internal memory.
Start SSHDROID service on phone and connect it with ssh - Putty(win) or Terminal/Shell ssh command.

Already connected on phone, in terminal, access copied folder:

Quote:

cd /storage/emulated/0/backupimg/

List all partition .img files

Quote:

root@p1:/storage/emulated/0/backupimg # ls aboot.img hyp.img persist.img raw_resourcesbak.img rpmbak.img sdibak.img abootbak.img hypbak.img pmic.img rct.img sbl1.img sec.img boot.img laf.img pmicbak.img recovery.img sbl1bak.img tz.img factory.img modem.img raw_resources.img rpm.img sdi.img tzbak.img

List all partitions: (showing only 2 samples )

Quote:

root@p1:/storage/emulated/0/backupimg # ls -al /dev/block/platform/f9824900.sdhci/by-name/ lrwxrwxrwx 1 root root 20 Jan 12 2015 aboot -> /dev/block/mmcblk0p8 lrwxrwxrwx 1 root root 21 Jan 12 2015 abootbak -> /dev/block/mmcblk0p14

Use #dd command to dump image file with respective file => partition, for sample:

Quote:

|root@p1:/storage/emulated/0/backupimg # dd if=aboot.img of=/dev/block/mmcblk0p8 4096+0 records in 4096+0 records out 2097152 bytes (2.0MB) copied, 0.167950 seconds, 11.9MB/s

Quote:

root@p1:/storage/emulated/0/backupimg # dd if=abootbak.img of=/dev/block/mmcblk0p14 4096+0 records in 4096+0 records out 2097152 bytes (2.0MB) copied, 0.166665 seconds, 12.0MB/s

Do this for all 24 files corresponding to 24 partitions listed (see the name of each on /dev/block)
After, restart 2 times the phone.
The first time you start the phone, do not even get signal. The second time, the signal will return.:laugh::laugh:

Poor data(GSM/WCDMA/LTE) signal - any ideas ?

Hello guys, at first ill describe my problem:
I have got D620r, and when i changed my android to 5.01 via KDZ my signal is realy weak ;/ it is no bootstack problem because i install both, kitkat and lollipop. I had install kitkat and lollipop again via KDZ ( with 1 week break) but i still had poor signal. Then i install CM and nothing has change ;/

I must say that i had drop my phone few times from height no higher than 1m, could it damage my radio antenna?
Have someone of You dismounting G2 mini? are there any antenna connectors that could unclip ? Or should i search reason in other things?

Darth.