Hi I have a rooted Z1 Compact with locked bootloader and xz dual recovery which I installed lollipop 5.1.1 on through twrp yesterday. Everything works fine the only problem is I'm completely unable to boot into recovery... any recovery. I've tried all combinations of buttons, downloaded quick root and tried to boot into recovery through ndr utils, rom and twrp manager but nothing works.. It just reboots as normal after hanging a little on the opening graphics. My volume buttons work fine, however when I boot up my phone where the led used to light up I noticed it isn't lighting up (although it is for texts/charging etc). Has anyone got any advice? I really need to get into recovery...
Showing posts with label tried. Show all posts
Showing posts with label tried. Show all posts
Monday, 19 October 2015
Phone wont boot up after i tried installing a new rom
Okay, so i have a galaxy s blaze 4g and i am having troubles booting up my phone i tried installing the stock rom back onto it after having cm11 on it for a couple days but it was not letting me use the internet it would always give me errors and i am having trouble just getting it back to the stock rom it loads up says samsung and then goes blank i have no idea what to do i have been scrolling through the internet for hours on end trying to find a solution please help!! :c
Friday, 16 October 2015
tried 5 roms all of them working fine just no audio during call any fix ?
i cant relize what i did wrong ... hope to find solution really need my phone multilang
Sunday, 4 October 2015
Nexus 5 won't connect to any available Wi-Fi network. Tried different factory images
I got a Nexus 5 D820 which was stuck in bootloop when I purchased it on eBay (one of the reasons it was cheap).
So long story short, I flashed it with factory image of M preview, and now it boots up and works just fine. It's Bad ESN, so cellular network does not work, but that's okay.
Now I can see all the wi-fi networks in and around my house but when I try to connect it says Wifi Connection Failure. See this image: http://i.imgur.com/poM1RvA.jpg
I have another Nexus 5 running M preview which connects to the network just fine.
Here's the wpa_supplicant file: https://i.imgur.com/X6vq3JD.jpg
Here's the logcat while I tried to connect:
Things I have tried:
So long story short, I flashed it with factory image of M preview, and now it boots up and works just fine. It's Bad ESN, so cellular network does not work, but that's okay.
Now I can see all the wi-fi networks in and around my house but when I try to connect it says Wifi Connection Failure. See this image: http://i.imgur.com/poM1RvA.jpg
I have another Nexus 5 running M preview which connects to the network just fine.
Here's the wpa_supplicant file: https://i.imgur.com/X6vq3JD.jpg
Here's the logcat while I tried to connect:
HTML Code:
[ 01-03 07:15:28.609 899: 899 I/wpa_supplicant ]
wlan0: Trying to associate with 60:fe:20:1b:xx:xx (SSID='ATT362' freq=2437 MHz)
[ 01-03 07:15:29.619 899: 899 I/wpa_supplicant ]
wlan0: CTRL-EVENT-ASSOC-REJECT bssid=60:fe:20:1b:xx:xx status_code=1
[ 01-03 07:15:29.619 899: 899 I/wpa_supplicant ]
wlan0: CTRL-EVENT-DISCONNECTED bssid=60:fe:20:1b:xx:xx reason=3 locally_generated=1
[ 01-03 07:15:29.619 899: 899 I/wpa_supplicant ]
wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="ATT362" auth_failures=1 duration=10- Airplane mode on/off
- Reboot
- Different stock ROMs (L, M, KitKat)
- Flashed KK radio on L 5.1.1
Friday, 2 October 2015
Has anybody here tried to update the Note 4 over Samsung Kies or SmartSwitch ?
Just wondering if I can update to OC6 over Samsung Kies. I'm not currently on the States and I already know that I'm not getting any updates over the air since there is no AT&T service here.
My phone came out of the box with Lollipop (COC4), and I have never tried to downgrade it, if anybody has a alternate way to update it to OC6, it would be really nice to know more about it :D !!
My phone came out of the box with Lollipop (COC4), and I have never tried to downgrade it, if anybody has a alternate way to update it to OC6, it would be really nice to know more about it :D !!
[What] Hey guys. So I tried undervolting once more and it goes really low.
So my procedure was setting same frequency as min and max and then going -5mv until it reboots. So far no reboots, trying to play it safe, but my voltages are getting really low and I don't know if it's normal or am I just lucky. Here's my table https://docs.google.com/spreadsheets...it?usp=sharing (700 v means it didn't reboot while I played youtube and launched apps, 700 x would mean that it did reboot at 700mv)
Still testing!
EDIT: It crashes if my phone goes a big step in voltage, in example +140 mv (from 770mv at 1497 MHz to 910mv at 1574 MHz)
Still testing!
EDIT: It crashes if my phone goes a big step in voltage, in example +140 mv (from 770mv at 1497 MHz to 910mv at 1574 MHz)
Thursday, 1 October 2015
Accidentally Soft Bricked Tab S 8.4; tried firmware and PIT flash, no good.
I was given a Galaxy Tab S by a relative who works in a cell phone store. It was a demo device, and it had demo mode enabled. I initially attempted to reboot into recovery and do a wipe from there, but an error came up informing me that "MDM" had blocked this option (I assume MDM to mean manufacturer demo mode). The tablet was still working at this point, so I rebooted and got the exact model number, SM-T700. I googled for a bit and found the recommendation to be to reinstall the firmware. I've done a lot of ODIN flashes before, so I downloaded the correct firmware from the official firmware post here on XDA, rebooted to download mode, and flashed it without issues.
After 30 minutes, the tablet still just showed the Samsung boot screen. I did a hard reboot with volume up + power, and left it. After another 30 minutes, it still didn't show anything. I rebooted to download mode and tried flashing again. Same result. I rebooted to recovery and tried to wipe the device from there. MDM block.
After more searching, I decided to use the PIT file and the firmware file in ODIN. I've had to use PIT files a couple times before, so I was very careful in checking to ensure I had the correct one. I am very confident I did. I flashed that, and still the tablet would not boot.
I then decided to install TWRP and see if I could wipe from there. TWRP gave me some useful information: it returned that it could not mount any of the partitions on the device. 'could not mount /system', 'could not mount /data', etc.
I've done a lot of googling and reading since then, but I can't seem to find anybody else with the result. The closest thing I can find is a similar situation on some ASUS tablets, but the solution would definitely not work here. The only other thing I can find is people recommending to flash the PIT file, which I have no tried a second time and still does not work.
Does anybody have any suggestions? I don't know what else to do.
After 30 minutes, the tablet still just showed the Samsung boot screen. I did a hard reboot with volume up + power, and left it. After another 30 minutes, it still didn't show anything. I rebooted to download mode and tried flashing again. Same result. I rebooted to recovery and tried to wipe the device from there. MDM block.
After more searching, I decided to use the PIT file and the firmware file in ODIN. I've had to use PIT files a couple times before, so I was very careful in checking to ensure I had the correct one. I am very confident I did. I flashed that, and still the tablet would not boot.
I then decided to install TWRP and see if I could wipe from there. TWRP gave me some useful information: it returned that it could not mount any of the partitions on the device. 'could not mount /system', 'could not mount /data', etc.
I've done a lot of googling and reading since then, but I can't seem to find anybody else with the result. The closest thing I can find is a similar situation on some ASUS tablets, but the solution would definitely not work here. The only other thing I can find is people recommending to flash the PIT file, which I have no tried a second time and still does not work.
Does anybody have any suggestions? I don't know what else to do.
Wednesday, 30 September 2015
Tried to flashHELP phone has 4 exclamations when rebooted or turned off and on
Please help, I tried to install and it failed, so I did a fastboot oem boot and now the phone works, but I cannot enter recovery, is there anything I can do. I am at a loss, whenever I restart the phone, I have to fastboot oem boot or it will stay stuck in 4 exclamations
I flashed the lboot from that zipfile available at , but now I also cannot enter boot loader.
I flashed the lboot from that zipfile available at , but now I also cannot enter boot loader.
Tuesday, 29 September 2015
Help needed - Tried to root my Nexus 7 and its gubbed
Hi all, hope I have posted this in the right place
Tried to root my Nexus 7 2012 using this guide
teknovenus .com/wordpress/speed-up-nexus-7-f2fs-slimkat/
(Wouldnt let me post link, it's a guide to rooting slimkat using NRT)
After all seemed to go well, when I fired up the tablet I got asked for a password to unencrypt the tablet. I googled the problem and its seems to be fairly common.
The problem I have now is I can't get anything to work. I tried to flash a Pac man ROM after wiping everything off the tablet (using teamwin recovery), but it just loops. I left it for some time.
I am pretty inexperienced at this stuff, so just looking to see if anyone knows how I can get the thing going again? I have no data backed up, I just want a snappy Rom that will allow me to use the kindle app, play books and a few basic games for the kids.
Any help would be appreciated.
Tried to root my Nexus 7 2012 using this guide
teknovenus .com/wordpress/speed-up-nexus-7-f2fs-slimkat/
(Wouldnt let me post link, it's a guide to rooting slimkat using NRT)
After all seemed to go well, when I fired up the tablet I got asked for a password to unencrypt the tablet. I googled the problem and its seems to be fairly common.
The problem I have now is I can't get anything to work. I tried to flash a Pac man ROM after wiping everything off the tablet (using teamwin recovery), but it just loops. I left it for some time.
I am pretty inexperienced at this stuff, so just looking to see if anyone knows how I can get the thing going again? I have no data backed up, I just want a snappy Rom that will allow me to use the kindle app, play books and a few basic games for the kids.
Any help would be appreciated.
Subscribe to:
Posts (Atom)